Syringe Inspection Solutions

Over the years we have become experts in the inspection of certain medical devices. For example, we have developed systems to inspect every aspect of medical syringes, from point to plunger.

Cannula Point Inspection

• Detects bad cannula points.
• Can be inspected after grind or during automated assembly.
• We have solutions for inspecting from side or end of cannula.
• Inspection rates of up to 4000/minute.
• Cameras mounted on stepper motors for automated setup.

Cannula Lumen Inspection

• Confirms cannula lumen is free of contaminants.

Cannula Grind Inspection

• Measures geometry of primary and secondary grinds.
• Vision system results may be used to adjust grinding equipment.

Hub to Cannula Adhesive Inspection

• Verifies amount and placement of adhesive.
• Machine vision solutions for most common medical adhesives.

3-D Cannula Angle & Bow Inspection

• Measures cannula angle and bow.
• Accurate results regardless of part rotation relative to camera.

Syringe Barrel Print Quality Inspection

• Verifies position of graduation marks.
• Checks print quality to identify smears, pin-holes, missing ink, etc.
• Inspects 360 degrees around barrel.

Machine Vision Solutions for Safety Syringes

• 100% inspection to help ensure each syringe will function correctly.
• Inspect springs, cutters, levers, shields, etc.

Don't quite see what you're looking for? We customize solutions.

We offer a free project evaluation service. Send us sample parts, your inspection criteria, and information about where the camera(s) may be mounted. We'll test your samples in our vision lab, then send you a report detailing technical feasibility. To learn more, contact us using the form at the bottom of this page. Or just call 612-888-6000.

• Medical Device Experience
• More Experience